Investment Casting Equipment Suppliers Wholesale - Jar Hing-3

1. pulp barrel diameter 770mm;
2. barrel depth 620;
3. the inner slurry barrel is made of 3mm thick stainless steel with a volume of 250L;
4. rotating speed: 23.3r/min;
5. the new drive structure is adopted to reduce the power of the equipment, which is half of the power consumption of the old dip machine, and the power is 0.75KW;
6. the pressure bearing of the pulp barrel is added to bear the gravity of the pulp and the pulp barrel, so that the output shaft of the reducer only bears the radial load, with reasonable stress, low noise and long service life.
6. the prefabricated slurry barrel is also equipped with a high-speed screw agitator, which is made of 304 stainless steel, with a rotation speed of 200-1000r/min, continuously adjustable, and a power of 0.75KW.

1. pulp barrel diameter 770mm;
2. barrel depth 620;
3. the inner slurry barrel is made of 3mm thick stainless steel with a volume of 250L;
4. rotating speed: 23.3r/min;
5. the new drive structure is adopted to reduce the power of the equipment, which is half of the power consumption of the old dip machine, and the power is 0.75KW;
6. the pressure bearing of the pulp barrel is added to bear the gravity of the pulp and the pulp barrel, so that the output shaft of the reducer only bears the radial load, with reasonable stress, low noise and long service life.
6. the prefabricated slurry barrel is also equipped with a high-speed screw agitator, which is made of 304 stainless steel, with a rotation speed of 200-1000r/min, continuously adjustable, and a power of 0.75KW.